Digital Multimeter - Cat III 300 V - 10 A - 1999 Counts

Digital Multimeter - Cat II 500 V /Cat III 300 V - 10 A - 1999 Counts.

• CAT II 500V / CAT III 300V
• 19 ranges
• automatic polarity indication
• automatic zero adjustment
• voltage measurements: 500 VAC and 500 VDC max.
• current measurements: DC 0.5 A max.
• resistance measurements: 2 MOhm
• with separate test leads (included)

Specifications:

• DC voltage: 0-200 mV / 2000 mV / 20 V / 200 V / 500 V
  • basic accuracy: ± (1.0% rdg + 2 digits) , ±(1.2% rdg + 2 digits) for 500 V range
  • input impedance: 1 MOhm
  • maximum input: 500 V
  • overload protection: 500 V DC or AC rms
• AC voltage: 0-200 V / 500 V
  • basic accuracy: ± (1.5% rdg + 3 digits)
  • input impedance: 450 kOhm
  • frequency range: 40-500 Hz
  • maximum input: 500V RMS
• DC current: 200 µA / 2000 µA / 20 mA / 200 mA / 10 A
  • basic accuracy: ± (1.5% rdg + 2 digits), ± (2.0% rdg + 2 digits) for 200mA range; ± (2.0% rdg + 3 digits) for 10 A range
  • overload protection: 0.5 A / 600 V fuse in mA range; 10 A / 600 V fuse in 10 A range
• resistance: 0-200 Ohm / 2000 Ohm / 20k Ohm / 200 kOhm /2000 kOhm
  • basic accuracy: ± ( 1.0% rdg +3 digits); ± (1.0% rdg + 5 digits) for 200Ohm range, ± (1.5% rdg + 3 digits) for 2kOhm range
  • overload protection: 0.5 A / 600 V fuse
• audible continuity measurement: built-in buzzer sounds if resistance is less than 50 Ohm
  • test voltage: approx. 1.8 V
• diode measurement: test forward voltage of diode
  • test voltage: approx. 1.8 V
• overrange: yes
• continuity buzzer: yes
• diode test: yes
• low-battery indication: yes
• maximum display: 3 ½
• LCD display:
  • size: 47 x 15 mm
  • digits: max. 1999
• ranging mode: manual
• data hold: no
• backlight: no
• dimensions: 118 x 65 x 30 mm
• weight (with battery): 100 g
• power supply: 2 x 1.5 V AAA R03P (incl.)
• auto power-off: no
• operating environment:
  • temperature: 0 °C to 40 °C (32 to 104 °F)
  • humidity: < 80% RH.
• storage environment:
  • temperature: -20 °C to 60 °C (-4 to 140 °F)
  • humidity: < 90% RH
• fuse:
  • F0.5 A / 600 V 5 x 20 mm (not replaceable)
  • F10A / 600 V 5 x 20 mm (not replaceable)
• test lead probe : CAT II 1000V / CAT III 600 V, 10A, L = 75 cm